A leather belt is a stylish and durable accessory, but sometimes its length is longer than necessary. Instead of buying a new one, you can shorten the belt yourself, especially if it has a classic buckle. In this article, we will tell you how to neatly and easily shorten a leather belt at home.

What you will need:

• leather belt
• screwdriver (for belts with screw fastening)
• sharp knife or scissors
• leather hole punch or punch
• ruler
• pencil or chalk
• lighter (optional - for melting edges on a synthetic base)

Step-by-step instructions

1. Determine the desired length of the belt

Put on the belt as usual and mark on which hole it fastens comfortably. Measure the length from this point to the edge of the buckle - this will be the new length.

2. Detach the buckle

Most leather belts have a buckle screwed on with a screw or secured with a rivet. Carefully unscrew or bend the fastener.

3. Cut off the excess part of the belt

Measure and cut the belt on the side where the buckle was (not the one with the holes, otherwise the appearance will suffer). Use a sharp knife or strong scissors.

4. Make a new hole for the screw or rivet

Using a hole punch, carefully punch a new hole for the screw, at the same distance as the original. If the belt is sewn, do not forget to trim and process the thread.

5. Attach the buckle back

Attach the buckle in a new place with a screw or rivet. Make sure everything is securely held.

6. Check the result

Try the belt on - it should fit exactly, not too tight or loose. If everything is in order, your belt is ready to use!

Helpful hints:

1. If the leather is thick, it is better to use a special knife for leather.
2. If you don't have a hole punch, you can use a nail and a hammer, but be careful.
3. For aesthetics, treat the cut with wax or leather polish.

A quality leather belt will serve you for many years - especially if it fits!